Designed to save energy, man power, chemicals, time and space.
Suitable for woven or knitted fabrics :. N100%, T100%, N + OP, T + OP T / C, CVC, T / R, N / C, and N / T.
ADVANTAGES
Low Liquor Ratio, Energy Efficient Design
Chamber is specially designed to reduce the water consumption when dyeing. Inner plate is patent design with special w-shaped corrugated floor. Fabric is flowing unhindered in its circulation cycle without need of large motor pump, saving electricity cost.
Expansion Device, No Crease Mark & No Rolling Selvedge
The front expansion device provides continuous impact & frequently changes the fabric position. Good to provide fabric expansion and to open filament, effective against curling fabrics. Rear expansion deice allows the fabric to relax and softening, increasing the quality of dyeing.
Low Tension, High Quality, Fast Dyeing System
With smooth fabric circulation and regulated fabric folding, the fabric is carried into the main reel at its lowest tension. The speed of the main reel can be controlled precisely, so the need of the reel and the fabric is at a simultaneous pace, avoiding any usual flaws.
Unique W-shaped Inner Plate, High Production Capacity
Special designed w-shaped inner plate plus large chamber structure, allowing one single nozzle to dye up to two rope of fabric at one time (for fabric< 200g/yard). Greatly increase the production capacity (increase up to 40% and above) and reducing the cycle time required, achieving a very color shade.
Central Control System, Automatic Computer Control
The machine is fully automatic controlled with advanced computer system. Design to have a precise dye feeding control, greatly enhance the dyeing success ratio and quality of dyeing. In conjunction with the central control system will provide better production system and management.
OPTIONAL EXTRAS
|
W-shaped Inner Plate |
Full Flow Guiding Pipe |
|
|
Quality Welding |
Efficient Heat Exchanger |
|
|
|
HEFA-1 |
HEFA-2 |
HEFA-4 |
HEFA-8 |
||||||||
50 |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
100 |
1200 |
|
Max Temperature |
140 ° C |
|||||||||||
Max Pressure |
4kg / cm & lt & lt .. 3 |
|||||||||||
Liquid Ratio |
1: 5-7 |
|||||||||||
Fabric Speed |
0 ~ 500 (m / min) |
|||||||||||
Heating Rate |
25min (20 ~ 130 ° C) |
|||||||||||
Cooling Rate |
20min (130 ~ 50 ° C) |
|||||||||||
No. of Tube (Qty.) |
1 |
1 |
2 |
4 |
||||||||
No. of Chamber |
1 |
2 |
4 |
8 |
||||||||
Main Pump (HP) |
10 |
15 |
25 |
30 |
50 |
60 |
100 |
125 |
||||
Steam (kg / hr) |
69 |
137 |
206 |
274 |
343 |
412 |
550 |
686 |
824 |
1100 |
1372 |
1650 |
Cooling Water (Lit) |
327 |
655 |
982 |
1310 |
1637 |
1965 |
2620 |
3275 |
3930 |
5040 |
6550 |
7860 |
Length (mm) |
6336 |
7558 |
8435 |
9257 |
9285 |
10200 |
10810 |
9285 |
10200 |
10810 |
9285 |
10200 |
Width (mm) |
1566 |
1765 |
3028 |
5722 |
||||||||
Height (mm) |
3200 |